555-8068 Surface mount power inductors, 9mm,  10mH thru 1000mH

Datasheet in (PDF) format

 

How to order code
555-8068-XXX-Y-ZZ
Basic Part No XXX = Inductance identifier, Y = tolerance, ZZ = packaging

ELECTRICAL SPECIFICATIONS

Basic Part Number

(XXX)-

Inductance

(mH)

Frequency

(MHz)

DCR (max)

(W)

IDC (max)

(A)

555-8068

 -100 10 2.52 0.06 2.60
-120 12 2.52 0.07 2.45
-150 15 2.52 0.08 2.27
-180 18 2.52 0.09 2.15
-220 22 2.52 0.10 1.95
-270 27 2.52 0.11 1.76
-330 33 2.52 0.12 1.56
-390 39 2.52 0.14 1.37
-470 47 2.52 0.17 1.28
-560 56 2.52 0.19 1.17
-680 68 2.52 0.22 1.11
-820 82 2.52 0.25 1.00
-101 100 1KHz 0.35 0.97
-121 120 1KHz 0.40 0.89
-151 150 1KHz 0.47 0.78
-181 180 1KHz 0.63 0.72
-221 220 1KHz 0.73 0.66
-271 270 1KHz 0.97 0.57
-331 330 1KHz 1.15 0.52
-391 390 1KHz 1.30 0.48
-471 470 1KHz 1.48 0.42
-561 560 1KHz 1.90 0.33
-681 680 1KHz 2.25 0.28
-821 820 1KHz 2.55 0.24
-102 1000 1KHz 2.60 0.23

Other electrical specifications to order - Consult factory

 

 

TOLERANCE (Y)
Tolerance Code (Y)

Inductance Tolerance

 Notes
J ± 5%

Made to order
K ± 10%

Made to order
M ± 20%

Standard

 

PACKAGING (ZZ)
Packaging Code (ZZ) Packaging Spec. Notes
-00 Loose Piece

Made to order
-36 Taped and Reeled

Standard - 500 per reel

 

MATERIAL SPECIFICATIONS

Operating Temperature

-30°C to +100°C

Insulation resistance

Over 100MW at 100 VDC between core and coil

Dielectric Strength

No dielectric breakdown at 100 VDC for 1 minute between core and coil

Temperature Characteristics

Inductance coefficient (0-2000) x 106/°C (-25 - 85°C)

Vibration resistance

Inductance deviation within  ±5%, (After vibration for 1 hour in each of three orientations with sweep vibration (10-55-10Hz) and 1.5mm P-P amplitude)
Previous Page  Next Page

Copyright © Wearnes Cambion Ltd 2004