Swaging Examples

Good Roll Swage Good Flare Swage Flare Swage: Split, due to excessive pressure and wrong tooling Roll Swage: Damaged swage end due to misalignment of anvil and terminal with punch Flare Swage: Insufficient swage due to improper anvil height adjustment Flare Swage: Terminal swollen due to slightly excessive swaging pressure and anvil height adjustment Bent Terminal: Bent terminal due to lifting board from anvil at an angle Bowed Terminal Board: Board bowed during swaging due to undersized mounting holes in board Damaged Board: Board damaged during swaging due to undersize terminal mounting holes and/or improper swaging tools
ITEMDESCRIPTIONDIAGNOSIS OR CAUSE
1Good Roll Swage---------------
2Good Flare Swage---------------
3Flare SwageSplit, due to excessive pressure and wrong tooling
4Roll SwageDamaged swage end due to misalignment of anvil and terminal with punch
5Flare SwageInsufficient swage due to improper anvil height adjustment
6Flare SwageTerminal swollen due to slightly excessive swaging pressure and anvil height adjustment
7Bent TerminalBent terminal due to lifting board from anvil at an angle
8Bowed Terminal BoardBoard bowed during swaging due to undersized mounting holes in board
9Damaged BoardBoard damaged during swaging due to undersize terminal mounting holes and/or improper swaging tools
Head Office:

Cambion Electronics Ltd., Mill Lane, Castleton, Hope Valley, Derbyshire. S33 8WR. United Kingdom

, Tel: 01433 621555, Registered in England and Wales, Company Registration Number: 00703283